Click here for more information about payment options and shipping costs.

Not sure what components you need?

Click here to custom build a HyperBlade™ kit.
Or, if you already know what you're looking for, select the individual components you'd like to order below.

 

	BLDU2 Version 2 HyperBlade™ LED driver unit with PulseCore™, MovieFlicker™, and ClashEffect™ technology as well as adjustable brightness and ignition speed for the blade (assembled) Even BRIGHTER than the original! $89
	BLHF2 Version 2 HyperBlade™ HyperFlex™ blade 3-piece board kit (assembled). Deluxe 3-piece blade board assembly, heavy-dueling version NOTE: This blade assembly is intended for those geared towards heavy saber dueling. $179
	BLHF2B Version 2 HyperBlade™ HyperFlex™ blade 1-piece board kit (assembled). Deluxe 1-piece blade board assembly, display and light dueling version NOTE: This blade assembly is intended for those geared towards light to moderate dueling and lighted saber displays. $179
	BLDC HyperBlade™ 40 inch DuelCore™ blade tubing and endcap kit (assembled) $29

 

	SMBT Bluetooth wireless sound module (connects to our driver unit). Complete w/ PC WinXP software CD and CE qualified bluetooth radio. USB PC dongle not included $189
	SMSD SaberSD in-the-hilt sound board (works standalone or with v2 driver). **Requires a speaker and a microSD memory card for sound storage (not included) $149
	SMSP Select Speaker36mm diameter (8ohm, 1w)28mm diameter (8ohm, 0.5w)26mm diameter can (8ohm, 0.5w) Miniature high-quality speaker for SaberSD sound module $5

 

	ACBAT Small Li-Ion 7.4V battery (750mAh) w/ wiring harness and recharge jack (powers blade and sound board) Works with HyperBlade™ LED driver and SaberSD sound board) $19
	ACBAT2 Small triangular Li-Ion 11V battery (750mAh) w/ wiring harness and recharge jack (powers blade) Works with HyperBlade™ LED driver unit for extra brightness (do not use with SaberSD sound board) $37
	ACBAT3 Stick Li-Ion 11V battery (1400mAh) w/ wiring harness and recharge jack (powers blade and sound board) Works with HyperBlade™ v2 LED driver and SaberSD sound board for longer battery life $42
	ACBC Li-Ion battery charger $35
	ACBTD Class 1 USB PC bluetooth dongle $50
	ACVIB Mini force feedback vibration motor for our SaberSD sound board. You must connect motor to your SaberSD board. Motor voltage: 1-3V $5
	ACCAB Convenience cable for SaberSD sound board. Use to connect to sound board header if using in standalone mode, with Lux saber, or other setup w/o our Hyperblade driver $1
	ACSDC microSD 1Gb memory card for SaberSD sound board $15
	SPRF Retrofit/install HyperBlade™ kit into your MR, or other custom hilt. Please click the link below and fill out the form in order to request a quote for the retrofit/installation of a HyperBlade™ kit into your MR or custom hilt. You will be contacted afterward with a quote. Retrofit/Install Currently Not Available Price must be custom quoted

Prices do not include shipping

dfhgdgh